Programmatic ITAD for U.S. enterprises · Lathrop, CA sales@maxicom.us
Home › Sustainability
Sustainability

Reuse First. Report Everything.

A reuse-first disposition hierarchy — because the embodied carbon in a working server stays saved only if the server stays in service. Reporting formatted for the CFO, the sustainability team and the SEC filing.

The hierarchy we work to

Reuse > refurbish > harvest > recycle > destroy. In that order, every time, unless policy or data classification forces the asset further down the chain. The reasoning is physical: the carbon cost of a modern server is overwhelmingly embodied in its manufacture, not in its operating energy. A two-socket server that stays in productive use for another three years in a secondary market avoids the manufacturing carbon of its replacement roughly once. A storage drive shredded straight out of a top-tier operator’s fleet — still perfectly functional, destroyed because policy said so — is a defensible choice, but it is a choice, and it should be a decision rather than a default.

Where your data classification and retention policy allow Clear or Purge sanitization under NIST 800-88 instead of Destroy, we will route the asset to reuse. Where they do not, we will route to physical destruction and material recovery through an R2v3 or e-Stewards certified downstream partner, and we will not pretend otherwise.

SEC climate disclosure, Scope 3 Category 5

Under the U.S. Securities and Exchange Commission’s climate-related disclosures framework, large filers that disclose Scope 3 emissions when material do so partly against Category 5: waste generated in operations. End-of-life IT lives in that category. The practical question for a sustainability team is whether the ITAD vendor’s reporting is specific enough to survive assurance.

What we hand over per lot: total weight, weight by material stream (iron, aluminum, copper, plastics, PCB material), the reuse/recycle/destroy split as a weighted percentage, the name and certification status of each downstream processor, and transport distance from origin site to Lathrop. That package drops into the Category 5 worksheet without further reconciliation.

What we do not claim

We do not hold R2v3 certification ourselves, and we will not represent that we do. We select R2v3- or e-Stewards-certified downstream recycling and destruction partners, and we can produce their certificates on request. We also do not quote a carbon-savings figure per asset without naming the embodied-carbon source we are drawing on (typically the vendor’s own ISO 14040-compliant product carbon footprint for that SKU, where published). Numbers without a named source do not help your sustainability narrative survive an auditor’s read.

Reuse-first, in practice

A representative quarter: 68% of assets by weight routed to reuse (either direct resale as working systems or refurbishment and resale through established remarketing channels), 24% routed to responsible recycling (material recovery), 8% routed to physical destruction under policy. That mix shifts with the asset types in your program — GPU-heavy lots skew toward reuse, healthcare laptop retirements skew toward destroy, data-center exits land in the middle.

The right question is not “what’s your recycling rate.” The right question is “what’s your reuse rate, and what forced the destruction decisions on the rest?” We answer both.

U.S. state e-waste mandates

Twenty-five states plus Washington D.C. operate e-waste laws that bear on how and where business IT can be disposed. Our downstream routing honors those mandates at the state of origin — an asset originating in California is handled under the Electronic Waste Recycling Act regardless of where it is ultimately processed; a Massachusetts origin sits under that state’s rules; and so on. Your closeout report documents origin state for each lot.